首頁 > 產品 > 5.8GHz/5.2GHz 無線通訊晶片 > A5130
A5130
產品選擇指南
General Description
A5130 is a low cost 5.2GHz/5.8GHz dual band transceiver. It supports on-air data rate to either 2Mbps or 4Mbps.
A5130 supports fast PLL settling time (30 us) for frequency hopping system. For packet handling, A5130 has built-in separated (64 bytes) TX/RX FIFO for data buffering and burst transmission, auto-ack and auto-resend, CRC for error packet filtering, FEC (7,4 hamming code) for 1-bit data correction per code word, RSSI for clear channel assessment, thermal sensor to monitor relative temperature, data whitening for data encryption / decryption. In addition, A5130 has built-in AES128 co-processor (Advanced Encryption Standard) for advanced data encryption or decryption which consists of the transformation of a 128-bit block into an encrypted 128-bit block. Those functions are very easy to use while developing a wireless system. All features are integrated in a small QFN4X4 24 pins package.
A5130’s control registers are accessed via 3-wire or 4-wire SPI interface such as TX/RF FIFO, ID register, RSSI value, frequency hopping and calibration procedures. Another one is the unique Strobe command via SPI to control power saving mode (sleep, idle, standby), TX mode and RX mode. The other connections between A5130 and MCU are GIO1 and GIO2 (multi-function GPIO) to output A5130’s status so that MCU could use either polling or interrupt scheme for radio control. Overall, it is very easy to develop a wireless application by a MCU and A5130 because of its rich and easy-to-use features.
Small size (QFN4X4, 24 pins).
Dual Frequency band: 5.2GHz / 5.8GHz.
FSK or GFSK modulation.
Sleep current (5 uA).
RX current consumption: 30 mA (AGC on).
TX current consumption: 25 mA (0 dBm)
On chip regulator, support input voltage 2 ~ 3.6V.
Programmable data rate 2M or 4Mbps.
Programmable TX power level from -10 ~ 0 dBm.
RX sensitivity: -86dBm (4Mbps) / -89dBm(2Mbps)
Fast PLL settling time (30 us) for frequency hopping system.
Built-in AES128 co-processor
AGC (Auto Gain Control) for wide RSSI dynamic range.
AFC (Auto Frequency Compensation) for frequency drift due to temperature.
Support low cost crystal (16 /16.384 MHz).
Low Battery Detector indication.
Easy to use.
Support 3-wire or 4-wire SPI.
Unique Strobe command via SPI.
ONE register setting for new channel frequency.
CRC Error Packet Filtering.
Auto-acknowledgement and auto-resend.
Separated 64Byte TX/RX FIFO.
8-bits RSSI measurement for clear channel indication.
Auto Calibrations.
Auto IF function.
FEC by (7, 4) Hamming code (1 bit error correction / code word).
Easy FIFO / Segment FIFO / FIFO Extension (up to 4K bytes).
Support FIFO mode frame sync to MCU.
Support direct mode with recovery clock output to MCU
HiFi quality wireless audio streaming
 5.2GHz/5.8GHz video streaming
 5.2GHz/5.8GHz ISM system
 Wireless toys and game controllers
Datasheet
Application Note
Reference circuit design (Module)
Reference code
Evaluation kit (EK)
Development Kit (DK)
Production test tool
*Please contact the agents or sales for more details