首頁 > 產品 > Bluetooth® LE/Zigbee > A8107
A8107
產品選擇指南
General Description
A8107 is a high performance and low cost 2.4GHz FSK/GFSK system-on-chip (SoC) wireless transceiver. With on chip fraction-N synthesizer, it can support the application of data rate from 5Kbps to 2Mbps and frequency hopping system and it is designed for Bluetooth Low Energy (Bluetooth 5.0 Single mode). It is a Bluetooth smart device. This device integrates high speed pipeline 8051 MCU, 128K Bytes In-system programmable flash memory, 8KB SRAM, various powerful functions and excellent performance of a leading 2.4GHz FSK/GFSK RF transceiver. A8107 has various operating modes, making it highly suited for systems where ultra-low power consumption is required. A8107 has 128K bytes flash that supports AES128 engine and CCM. For low current consumption, A8107 is integrated with both LDO and DC-DC (buck) so that this device can be operated more efficient when VDD voltage range from 2.7V to 3.6V. User can configure one of them (LDO or DC-DC) as a powered source for device operations.
RF
 Frequency band: 2400 – 2483.5MHz.
 FSK and GFSK modulation
 High sensitivity:
 -96dBm at 500Kbps data rate
 -92dBm at 1Mbps data rate
 -90dBm at 2Mbps data rate
 Programmable data rate 5K ~ 2Mbps.
 In-System programming/ In-Application programming
 Fast settling time synthesizer for frequency hopping system.
 Support low cost crystal 16 MHz.
 Easy to use.
 Change frequency channel by ONE register setting.
 8-bits Digital RSSI for clear channel indication.
 Auto RSSI measurement.
 Auto WOR (wake up when receive RX packet).
 Auto WOT (wake up to transmit TX packet).
 Auto Calibrations.
 Auto IF function.
 Auto Frequency Compensation.
 Auto CRC Check.
 Separated 64 bytes RX and TX FIFO.
Low Power
 RX current consumption with MCU in operation mode: 19.5mA
 TX current consumption with MCU in operation mode ( 23mA @ 3dBm output power).
 PM3 sleep mode (without timer) current (0.9 uA)
Microcontroller
 High performance pipeline complicated 8051128KB Flash memory with copy protection, 8KB SARM
 Flash endurance:10,000 cycles (typical)
Peripherals
 Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 of crystal oscillator.
 Built-in thermal sensor for monitoring relative temperature.
 Built-in eight channels 12-bits ADC for general purpose analog input (0V ~ 1.8 V).
 Built-in Low Battery Detector.
 32/24 GPIO (24 I/O only in QFN40)
 UART, I2C, SPI serial communication
 Three16/8-bit counter/timers
 Four Channel PWM
 Watchdog timer
 Sleep timer
 In-Circuit Debugger
Layout
 Package size (QFN5 X5, 40 pins/ QFN6X6 48 pins)
 2400 ~ 2483.5 MHz ISM frequency hopping system
 Smart remote controller
 Home and building automation
 Wireless keyboard and mouse
 Wireless toy and gaming
 Helicopter and airplane radio controller
 Bluetooth smart device
Datasheet
Application Note
Reference circuit design (Module)
Reference/LIB code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details