首頁 > 產品 > Bluetooth® LE/Zigbee > A8107M0
A8107M0
產品選擇指南
General Description
A8107M0 is a high performance and low cost 2.4GHz FSK/GFSK system-on-chip (SoC) wireless transceiver. With on chip fraction-N synthesizer, it is designed for Bluetooth Low Energy (Bluetooth 5.1 Single mode).

A8107M0 has various powerful functions and excellent performance of a leading 2.4GHz FSK/GFSK RF transceiver.
A8107M0 has various operating MODEs, making it highly suited for systems where ultra-low power consumption is required.

A8107M0 supports AES128 engine and CCM. For low current consumption, A8107M0 is integrated with both LDO and DC-DC (buck) so that this device can be operated more efficient when VDD voltage range from 2.7V to 3.6V. User can configure one of them (LDO or DC-DC) as a powered source for device operations.
RF
 Frequency band: 2400 – 2483MHz.
 FSK and GFSK modulation
 High sensitivity:
 -97dBm at 500Kbps data rate
 -94dm at 1Mbps data rate
 -91dBm at 2Mbps data rate
 Programmable data rate 5K ~ 2Mbps
 Fast settling time synthesizer for frequency hopping system
 Support 16MHz crystal
 Easy to use.
 Change frequency channel by one register setting
 8-bits Digital RSSI for clear channel indication
 Auto RSSI measurement
 Auto WOR (wake up when receive RX packet)
 Auto WOT (wake up to transmit TX packet)
 Auto Calibrations
 Auto IF function
 Auto Frequency Compensation
 Auto CRC Check
 Separated 256 bytes RX and TX FIFO
Low Power
 Wide Range Operation Voltage from 2.0V ~ 3.6V
 RX current consumption with MCU stop and DC-DC turn on: 6.4mA @BATH= 3.3V
 TX current consumption with MCU stop and DC-DC turn on: 9mA @ 5dBm, BATH=3.3V
 Power saving MODE without sleep timer, no SRAM retention (1.3 uA)
 Power saving MODE with sleep timer, 16K SRAM retention (2.1uA)
Microcontroller
 High performance ARM-M0 MCU
 256KB Flash memory with copy protection, 32KB SARM
Peripherals
 TFT DMA controller and 8080 output interface(I80)
 UART, I2C, SPI serial communication
 Operation clock: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 of crystal oscillator
 Two 32-bit timers and one 32-bit dual MODE timer
 Four Channel PWM
 Watchdog timer
 Two 16-bit Sleep timer
 In-Circuit Debugger
 In-System programming/ In-Application programming
 23/31 GPIO for QFN40/48
 Built-in thermal sensor for monitoring relative temperature
 Built-in eight channels 12-bits ADC for general purpose analog input (0V ~ 1.8 V)
 Built-in Low Battery Detector
Layout
 Package size (QFN5X5, 40 pins/ QFN6X6 48 pins)
 2400 ~ 2483.5 MHz ISM frequency hopping system
 Smart remote controller
 Home and building automation
 Wireless keyboard and mouse
 Wireless toy and gaming
 Helicopter and airplane radio controller
 Bluetooth smart device
Datasheet
Application Note
Reference circuit design (Module)
Reference/LIB code
Evaluation kit (EK)
Development Board (DVP)
ICE tool
Flash/OTP programming tool
Production test tool
*Please contact the agents or sales for more details